Solar monitoring for SolarEdge owners.
Solmiro checks your SolarEdge system every day against the weather over your roof and e-mails you when something is wrong. Connecting is free and takes about two minutes; the daily check costs €1 for 14 days, then €2.50 a month, billed yearly (€30 incl. VAT).
What Solmiro adds to the SolarEdge app
-
A daily check that comes to you
SolarEdge waits for you to open it. Solmiro checks the installation itself, once a day, and sends an e-mail only when something is wrong.
-
Yesterday’s yield against yesterday’s weather
We take the sunshine over your address and work out what your system should have produced in it. SolarEdge shows you the number; we tell you whether it was good enough.
-
Silence is an alert too
If your SolarEdge system stops reporting, whether the inverter went quiet or the connection broke, you get an e-mail.
-
A second, independent pair of eyes
We do not sell or install hardware. The check works the same whoever installed your system, and the e-mail goes to you.
How connecting a SolarEdge system works
About two minutes, in your browser. There is no key to copy, no site ID to look up and nothing to install.
-
Choose SolarEdge in the wizard
Create a Solmiro account, open “Connect your inverter” and pick SolarEdge.
-
Sign in at SolarEdge and approve
You are sent to SolarEdge’s own login page, where you sign in with your monitoring account and approve read access. The password is typed on their page and never reaches us.
-
Pick your site
We list the sites your account owns, you choose the one on your roof, and the last 30 days of production load with it.
Access is read-only. Withdraw it in your SolarEdge account whenever you like and we stop receiving data.
Who gets told when something breaks
SolarEdge’s own alert guide says only the account manager or admin, usually your installer, can set the alert rules. You get alert e-mails only if the installer has given you permission for your site. The guide describes no comparison with the weather.
What the SolarEdge portal still does better
For per-optimiser detail, the panel layout of your roof and firmware, keep using the SolarEdge portal. Solmiro reads daily production and current power.
Questions about SolarEdge and Solmiro
Do you need my SolarEdge password?
No. You sign in on SolarEdge’s own page and approve read access there. The password is never typed into Solmiro and we never see it.
Do I need admin rights on the site?
You need an account that can see the site’s production. If your installer still owns the site in SolarEdge, ask them to transfer it to you.
Can Solmiro change anything on my inverter?
No. Access is read-only: Solmiro can see your production and cannot switch or change anything.
The SolarEdge portal is free. Why pay €2.50 a month?
Because a portal answers a question only when you think to ask it. €2.50 a month comes to €30 a year, roughly what one lost sunny week costs in summer, and a daily check is there so that such a week does not go unnoticed.
Connect your SolarEdge installation first, pay later
Connect your inverter and see your own history before you pay anything. €1 switches on the daily check for 14 days, then €2.50 a month, billed yearly (€30 including VAT). Read-only access, and you can cancel online at any time.
All product names, logos and brands are property of their respective owners and are used for identification purposes only. Solmiro is not affiliated with or endorsed by them.